netatmo

# Netatmo Control Netatmo smart home devices via `netatmo` CLI. ## Setup Credentials in `~/.config/netatmo/`: - `credentials.json`: `{"client_id": "...", "client_secret": "..."}` - `tokens.json`: OAuth tokens (auto-refreshed) ## Commands ```bash netatmo status # Full overview (thermostat + all sensors) netatmo thermostat # Thermostat details only netatmo weather # All sensors including Office netatmo history # 7-day temperature history with sparklines netatmo history --days 14 # Custom period netatmo set 21 # Set target temp (7-30°C, 3h manual mode) netatmo mode schedule # Resume schedule netatmo mode away # Away mode (12°C) netatmo mode hg # Frost guard (7°C) netatmo <cmd> --json # JSON output for any command ``` ## Available Data | Location | Temp | Humidity | CO₂ | Noise | Pressure | Battery | |----------|------|----------|-----|-------|----------|---------| | Bedroom (main) | ✓ | ✓ | ✓ | ✓ | ✓ | — | | Outdoor | ✓ | ✓ | — | — | ✓* | ✓ | | Living Room | ✓ | ✓ | ✓ | — | — | ✓ | | Office | ✓ | — | — | — | — | — | *Pressure displayed with Outdoor (sensor in main station) ## Notes - CO₂ >1000 ppm = poor ventilation - `set` uses manual mode for 3h, then reverts to schedule - Tokens auto-refresh on expiry - History shows ASCII sparklines for temperature trends